DIY Leather Jacket Studs: A Step-by-Step Guide

Materials and Tools

Required:

* Leather jacket * Studs (various sizes and styles) * Hammer or mallet * Awl or sharp object * Ruler or measuring tape * Optional: Stud setter tool

Optional:

* Stud removal tool * Pliers

Instructions

1. Plan Your Design

* Decide on the placement and pattern of the studs. * Use a ruler or measuring tape to mark out the locations.

2. Mark the Stud Holes

* Use an awl or sharp object to create small holes at the marked locations. * This will guide the studs into place.

3. Insert the Studs

* Place a stud in the hole. * Hold it in place and gently tap it down with a hammer or mallet. * Use a stud setter tool for a more precise placement.

4. Secure the Studs

* Once the studs are in place, bend the prongs on the back of the studs over to secure them. * Use pliers if necessary.

5. Remove Excess Studs (Optional)

* If you make a mistake or change your mind, use a stud removal tool to remove studs.

Tips:

* Start with a few studs to get the hang of the technique. * Use different sizes and styles of studs for a unique look. * Practice on a scrap piece of leather first to avoid damaging your jacket. * Be careful not to over-tighten the studs, as this can damage the leather.